Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the AdBlue Light on a Tata Safari?

Model: Tata Safari MK 1 - Years 1998-2019
Part: AdBlue warning light

To reset the AdBlue light on a Tata Safari, you need to add the additive liquid into the tank, which is located at the bottom of the car. You can locate the filler neck by opening the rear hatch and lifting the carpet at the base of the boot. On its right side, you will find the filler neck where you can pour in the necessary amount of additive liquid. After topping up, turn on the instrument cluster to verify that the light has been reset.

Updated on 3 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the AdBlue warning light in the Tata Safari?
Tata Safari (2021-2026 / MK 2) If the AdBlue light in the instrument panel of our Tata Safari has turned on, it means that the liquid of the anti-pollution system has reached the m…
How to reset the AdBlue warning light in the Tata Safari?
How to reset the AdBlue warning light in the Tata Safari?
Tata Safari (1998-2019 / MK 1) If the AdBlue light comes on in the instrument panel of our Tata Safari, it means that the pollution control system liquid has reached the minimum le…
How to reset the AdBlue light in the Tata Safari?
How to reset the AdBlue light in the Tata Safari?
Tata Safari (1998-2019 / MK 1) If the AdBlue warning light on our Tata Safari's dashboard has turned on, it means that the pollution control system liquid has reached the minimum l…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos