Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Tesla Model S: pure power [electric]

Model: Tesla Model S MK 1 - Years 2012-2024

Anyone who has not tried this car may not be able to speak; this electric version of the Tesla is frightening for 2 very important aspects: 1) The engine develops power in the order of 700 horsepower and lightning-fast acceleration from 0 to 100 in just 2.6 seconds, thanks also to the AWD system and the very low center of gravity . 2) Despite these frightening data declared for power, this car manages to travel around 600 kilometers with a full charge. It is also equipped with an integral traction system for the most uneven surfaces. Very luxurious and fine interior equipped with state-of-the-art security systems and a 17-inch display.

Posted on 17 February 2020 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the battery of the Tesla Model S key fob.
Replacement of the battery of the Tesla Model S key fob.
Tesla Model S (2012-2024 / MK 1) Today we will see the instructions that will allow us to disassemble and replace the battery of the key remote of the Tesla Model S, in simple steps.…
How to Reset the Tire Pressure Light in a Tesla Model S?
How to Reset the Tire Pressure Light in a Tesla Model S?
Tesla Model S (2012-2024 / MK 1) In this tutorial, you will see how to reset the tire pressure light in a Tesla Model S, a very simple and quick operation to perform only after resto…
How do you replace the cabin filter of the Tesla Model S?
How do you replace the cabin filter of the Tesla Model S?
Tesla Model S (2012-2024 / MK 1) In order to replace the cabin filter of the Tesla Model S, you need to open the front hood so that you can access the corresponding cargo compartment…

How to Remove the Timing Belt from a Nissan Juke

How do you remove the timing belt from a Nissan Juke? Raise the car on a column lift and remove the front wheel, using a screwdriver to detach the right wheel arch liner. Once these operations are complete: lift the bonnet, remove the engine soundproofing panel and the timing belt cover (from the wheel arch). Use a suitable spanner to loosen the tensioner pulley and slide the belt off its seat. After fitting the new belt, use the spanner to tension the tensioner pulley, adjusting until the correct tension is achieved on the belt (previously fitted). Finally, check the tensioner and the belt itself, tightening everything with a socket spanner.

Watch the video!


by ScegliAuto

More videos