Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the license plate holder of the TM Racing SMR 125?

Model: Tm Racing Smr 125
Part:

Video tutorial

It will be possible to replace the license plate holder of the TM Racing SMR 125 by loosening the screws that attach it to its housing: these screws can be found on the bottom of the rear fender. Once they have been loosened, it will be possible to proceed by completely removing the old license plate holder in order to insert the new replacement piece.

At this point, it will be possible to proceed by fastening it with the respective screws and positioning the license plate: the latter must be locked into place with the appropriate screws. In this way, it can be ensured that the piece remains secure during driving.


Posted on 7 June 2025 by ScegliAuto


Related tutorials

How to Replace the Number Plate Holder on the TM Racing SMR 125?
How to Replace the Number Plate Holder on the TM Racing SMR 125?
Smr 125 To replace the number plate holder on the TM Racing SMR 125, loosen the screws securing the piece at the rear mudguard. These will be located both at…
How to replace the number plate holder on the TM SMR 125
Smr 125 Today's steps will show you how to remove and replace the number plate holder on the TM SMR 125 motorcycle, following the instructions below. First, …
How to Replace the Silencer of the TM Racing SMR 125
How to Replace the Silencer of the TM Racing SMR 125
Smr 125 To replace the silencer on the TM Racing SMR 125, you need to unscrew all the bolts securing the rear side fairing, behind which the old silencer is …

How to Replace the Headlight Bulb on the SYM Bonus 110 Scooter?

As shown in this tutorial, replacing the headlight bulb on the SYM Bonus 110 scooter is a very simple and quick task. Before proceeding, ensure the key is not inserted for safety. Start by removing both mirrors, then unscrew all the screws securing the front fairing and separate it from the handlebars. Finally, disconnect the power connector, unscrew the bulb holder screws, and remove the bulb from the headlight. Fit the replacement bulb, avoiding direct contact with the glass using bare hands.

Watch the video!


by ScegliAuto

More videos