Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Tm Racing Smr 125
Part: Engine

In this short and simple guide, we will see how to carry out a complete revision of the entire engine block of the TM Racing SMR 125 motorcycle. First of all, it is necessary to remove the entire engine block from the motorcycle frame, disconnecting the intake and all the wiring; then proceed to unscrew all the screws of the engine case, starting with the disassembly of the thermal group. Then we carry out the revision of the transmission and replace all the gaskets and seals of the engine, also checking the condition of all the bearings (replace them if necessary); finally, we reassemble the engine block!

Posted on 13 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on a TM Racing SMR 125?
How to Change the Engine Oil on a TM Racing SMR 125?
Smr 125 To change the engine oil on a TM Racing SMR 125, loosen the drain plug located at the bottom centre of the bike. This will allow all the oil to drain…
How to Mix Fuel for the TM Racing Smr 125
Smr 125 In this brief guide, we will go through the steps on how to correctly mix fuel for the TM Racing Smr 125 enduro bike. First, position yourself at the…
How to replace the piston in the TM Racing SMR 125?
How to replace the piston in the TM Racing SMR 125?
Smr 125 To replace the piston in the TM Racing SMR 125, access the internal components of the engine: specifically, unscrew the bolts securing the cylinder, …

How do you adjust the headlights of the Kymco Xciting S 400i?

In order to adjust the headlights of the Kymco Xciting S 400i, you need to completely remove the panel that is located under the front headlight and on the top of the front fork. Once this panel has been removed, you will be able to locate the bolts underneath that allow you to adjust the angle of the headlight. By tightening this bolt, you will notice that the beam of light from the headlight will rise; conversely, by loosening the bolt, you will notice that the beam will lower. Once the adjustment is complete, you can reinsert the panel.

Watch the video!


by ScegliAuto

More videos