|
Do it yourself
| |||
| ||||
|
Model: Tm Racing Smr 125
To replace the front fairing on the TM Racing SMR 125, you need to unscrew the screws that secure it from the inside, just below the handlebars. Once this is removed, disconnect the cables connected to the headlamp so that it and the fairing can be taken off. After removal, install the new replacement part by fitting the appropriate supports. This way, the fairing can be positioned on the supports and secured in place with the correct screws.
Updated on 27 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Smr 125
In this video, you will see how to make some aesthetic and functional modifications on a Tm Racing SMR 125 motorcycle, following the instructions pro…
Smr 125
To replace the exhaust pipe of the TM Racing SMR 125, you need to loosen the screws that hold the side panel on the right side of the motorcycle: onc…
Smr 125
In order to replace the footpegs of the TM Racing SMR 125, you need to loosen the nut that secures them to the respective housings on the side of the…
|
How to Remove the Engine from a KTM EXC 300?
To remove the engine from the KTM EXC 300, you need to take out the engine block from its housing by unscrewing the bolts that secure it to the supports. Once the engine block is removed, unscrew the bolts that secure the cylinder at the top, then proceed to remove the side casings. Underneath, you will find the piston and other internal components, such as the clutch. The necessary parts can now be replaced, and you can subsequently reassemble all the components that were removed earlier. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.007
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |