Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Mr2
    4. : Checks and maintenance

Toyota Mr2 - Checks and maintenance

Toyota Mr2 (1990-2000 / W20, MK 2)
How do you remove the tank of the Toyota MR2?
In order to replace the fuel tank of the Toyota MR2, the car must be lifted with a jack or a bridge, so that the components at the bottom of the vehicle can be …read all…
Posted on 27 May 2022 by ScegliAuto
Toyota Mr2 (1990-2000 / W20, MK 2)
Car positioning on stands
If the car has to be positioned on stands, first of all check the capacity of the stands themselves, or if they are able to withstand the weight of the car. At …read all…
Posted on 7 August 2023 by ScegliAuto
Anti roll bar (1) Checks and maintenance (2) Oil filter (1) Engine oil (1) Door panel (1) Gear Shift Knob (1) Fuse box (1) Windscreen wipers (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos