Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Mr2
    4. : Windscreen wipers

Toyota Mr2 - Windscreen wipers

Toyota Mr2 (1990-2000 / W20, MK 2)
Filling of washer fluid reservoir
The glass washer reservoir on this car model is located in the front left part of the engine compartment (looking from the front), near the shock absorber …read all…
Posted on 21 August 2023 by ScegliAuto
Anti roll bar (1) Checks and maintenance (2) Oil filter (1) Engine oil (1) Door panel (1) Gear Shift Knob (1) Fuse box (1) Windscreen wipers (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos