Do it yourself
Frequently asked questions about cars and motorcycles

Filling the Windscreen Washer Reservoir

Model: Toyota Mr2 MK 2, W20 - Years: 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
Part: Windshield wipers

See other generations:
Video tutorial

The windscreen washer reservoir on the car model in question is located at the front left of the engine bay (when facing the front), near the strut tower. Once you locate the reservoir, open the cap and proceed to fill it. At this point, determine what to fill the reservoir with: water, a mixture of water and dish soap, alcohol, or glass cleaner.

In fact, there are ready-to-use mixtures available that can ensure both perfect cleaning of the glass and prevent the formation of deposits that could clog the system, all at a very low cost.


Updated on 16 February 2026 by ScegliAuto


Related tutorials

Toyota Mr2 (1990-2000 / MK 2, W20) To replace the fuel tank on a Toyota MR2, lift the car using a jack or ramp to access the components underneath. For this model, the tank is located …
Toyota Mr2 (1990-2000 / MK 2, W20) Replacing the oil filter on a 1993 Toyota MR2 is a very simple task that you can do yourself, especially with the help of our short video tutorial. T…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos