Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. : Mr2

Toyota Mr2 - Video guides

Toyota Mr2 (1999-2007 / W30, MK 3)
Removing the Front Headlight of the Toyota MR2
Next, we will see how to remove and replace the front headlight of the Toyota MR2. First, open the front bonnet of the vehicle and remove the internal plastic …Read all…
Posted on 28 May 2026 by ScegliAuto
Toyota Mr2 (1990-2000 / MK 2, W20)
How to replace the headlights bulbs in the Toyota MR2?
In this tutorial, we will see how to replace the headlights bulbs on a Toyota MR2, a very simple and quick operation. First of all, let's make sure that the …Read all…
Posted on 13 December 2025 by ScegliAuto
Toyota Mr2 (1990-2000 / MK 2, W20)
How to replace the alternator of the Toyota MR2.
In this guide, we will see the main instructions on how to disassemble and replace the alternator of the Toyota MR2. To remove the alternator, it is necessary …Read all…
Posted on 11 December 2025 by ScegliAuto
Toyota Mr2 (1999-2007 / W30, MK 3)
How to remove the side air intake on a Toyota MR2
Let's see how to remove the side air intake located on the Toyota MR2: the operation requires removing the internal panels first to access the fastening nuts. …Read all…
Posted on 21 October 2025 by ScegliAuto
Toyota Mr2 (1999-2007 / W30, MK 3)
Where are the fuses located in the Toyota MR2?
The fuses of the Toyota MR2 are contained within dedicated fuse boxes: this model of car has four boxes that contain fuses. The first is located in the left …Read all…
Posted on 5 September 2026 by ScegliAuto
Toyota Mr2 (1990-2000 / MK 2, W20)
How to Replace the Oil Filter on a Toyota MR2
Replacing the oil filter on a 1993 Toyota MR2 is a very simple task that you can do yourself, especially with the help of our short video tutorial. The oil …Read all…
Posted on 3 August 2026 by ScegliAuto
Toyota Mr2 (1990-2000 / MK 2, W20)
How to Remove the Fuel Tank from a Toyota MR2?
To replace the fuel tank on a Toyota MR2, lift the car using a jack or ramp to access the components underneath. For this model, the tank is located near the …Read all…
Posted on 22 July 2026 by ScegliAuto
Toyota Mr2 (1990-2000 / MK 2, W20)
How to Remove the Door Panel of the Toyota MR2?
To remove the door panel of the Toyota MR2, first remove the trim located above the glove compartment and take out the screws underneath. Next, remove the …Read all…
Posted on 11 July 2026 by ScegliAuto
Toyota Mr2 (1990-2000 / MK 2, W20)
How to Replace the Gear Knob on a Toyota MR2?
To replace the gear knob on a Toyota MR2, simply grasp the old knob located at the end of the gear lever and rotate it anti-clockwise. This will free it from …Read all…
Posted on 14 June 2026 by ScegliAuto
Toyota Mr2 (1990-2000 / MK 2, W20)
Check and Restore Engine Oil Level
For proper engine efficiency, it is crucial that the engine oil level is always correct: the engine is equipped with a dipstick that allows you to check the …Read all…
Posted on 28 February 2026 by ScegliAuto
Toyota Mr2 (1990-2000 / MK 2, W20)
Filling the Windscreen Washer Reservoir
The windscreen washer reservoir on the car model in question is located at the front left of the engine bay (when facing the front), near the strut tower. Once …Read all…
Posted on 24 February 2026 by ScegliAuto
Toyota Mr2 (1990-2000 / MK 2, W20)
Replacement of the Anti-Roll Bar
The purpose of a device like the anti-roll bar is to allow the vehicle to protect the system, cushioning and minimizing all possible impacts. Over time, …Read all…
Posted on 20 February 2026 by ScegliAuto
Toyota Mr2 (1990-2000 / MK 2, W20)
Positioning Vehicle on Axle Stands
If you need to position the vehicle on axle stands, first check the load capacity of the stands to ensure they can support the weight of the vehicle. At this …Read all…
Posted on 21 February 2026 by ScegliAuto

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos