Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the alternator of the Toyota MR2.

Model: Toyota Mr2 MK 2, W20 - Years 1990-2000
Part: Alternator

In this guide, we will see the main instructions on how to disassemble and replace the alternator of the Toyota MR2. To remove the alternator, it is necessary to disconnect the suspension by removing the wheel and unscrewing all the fastening screws; then we proceed to disconnect the alternator belt by unscrewing its fastening screws and disconnecting the electrical wiring to remove it, as shown in the video. At this point, we perform the repair or replacement of the alternator, securing it properly; we then reassemble the suspension and the wheel, checking the engine's ignition.

Posted on 11 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Fuel Tank from a Toyota MR2?
How to Remove the Fuel Tank from a Toyota MR2?
Toyota Mr2 (1990-2000 / MK 2, W20) To replace the fuel tank on a Toyota MR2, lift the car using a jack or ramp to access the components underneath. For this model, the tank is located …
How to Replace the Oil Filter on a Toyota MR2
How to Replace the Oil Filter on a Toyota MR2
Toyota Mr2 (1990-2000 / MK 2, W20) Replacing the oil filter on a 1993 Toyota MR2 is a very simple task that you can do yourself, especially with the help of our short video tutorial. T…
How to Replace the Gear Knob on a Toyota MR2?
How to Replace the Gear Knob on a Toyota MR2?
Toyota Mr2 (1990-2000 / MK 2, W20) To replace the gear knob on a Toyota MR2, simply grasp the old knob located at the end of the gear lever and rotate it anti-clockwise. This will free…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos