Do it yourself
Frequently asked questions about cars and motorcycles

Replacement of the Anti-Roll Bar

Model: Toyota Mr2 MK 2, W20 - Years: 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
Part: Anti-roll bar

See other generations:
Video tutorial

The purpose of a device like the anti-roll bar is to allow the vehicle to protect the system, cushioning and minimizing all possible impacts. Over time, components like these can wear easily, so it is advisable to replace them.

First, position the car in a safe and stable location to work, applying the handbrake and chocking the wheels. You can perform a replacement simply using a screwdriver, ensuring to unscrew everything properly.

Once the bar is removed, you can introduce the new one.


Updated on 13 February 2026 by ScegliAuto


Related tutorials

Toyota Mr2 (1990-2000 / MK 2, W20) Replacing the oil filter on a 1993 Toyota MR2 is a very simple task that you can do yourself, especially with the help of our short video tutorial. T…
Toyota Mr2 (1990-2000 / MK 2, W20) In this guide, we will see the main instructions on how to disassemble and replace the alternator of the Toyota MR2. To remove the alternator, it is …
Toyota Mr2 (1999-2007 / MK 3, W30) Next, we will see how to remove and replace the front headlight of the Toyota MR2. First, open the front bonnet of the vehicle and remove the interna…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Remove the Spare Wheel from the Citroen C4 Picasso

Follow these instructions to remove the spare wheel and replace it on the Citroen C4 Picasso. On this model, the spare wheel is located under the vehicle's floor; to lower it, simply unscrew the bolt to loosen the strap, then disconnect it from the spare wheel, as shown in the video. At this point, lift the vehicle and remove the wheel, securing the spare wheel or space-saver; tighten the bolts in a criss-cross pattern, finally placing the old wheel back under the vehicle's floor!

Watch the video!


by ScegliAuto

More videos