Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Mr2
    4. : 1990-2000 (MK 2, W20)

Toyota Mr2 Years 1990-2000 (MK 2, W20)

Toyota Mr2 (1990-2000 / W20, MK 2)
How to replace the oil filter on a Toyota MR2.
Replacing the oil filter on a 1993 Toyota MR2 is a very simple operation that can be performed independently, thanks to the help of our short video tutorial. …read all…
Posted on 26 June 2023 by ScegliAuto
Toyota Mr2 (1990-2000 / W20, MK 2)
How do you remove the tank of the Toyota MR2?
In order to replace the fuel tank of the Toyota MR2, the car must be lifted with a jack or a bridge, so that the components at the bottom of the vehicle can be …read all…
Posted on 27 May 2022 by ScegliAuto
Toyota Mr2 (1990-2000 / W20, MK 2)
How do I remove the Toyota MR2 door panel?
In order to remove the door panel of the Toyota MR2 you have to go to remove the molding that is located above the glove box and remove the screws below. …read all…
Posted on 3 May 2024 by ScegliAuto
Toyota Mr2 (1990-2000 / W20, MK 2)
How do I replace the gear knob on the Toyota MR2?
In order to replace the Toyota MR2 gear knob you simply have to grab the old knob located on the end of the gear lever and turn it counterclockwise. By doing …read all…
Posted on 17 March 2024 by ScegliAuto
Toyota Mr2 (1990-2000 / W20, MK 2)
Check and restore engine oil level
For correct engine efficiency it is very important that the engine oil level is always correct: the engine is in fact equipped with a stick that allows you to …read all…
Posted on 29 August 2023 by ScegliAuto
Toyota Mr2 (1990-2000 / W20, MK 2)
Filling of washer fluid reservoir
The glass washer reservoir on this car model is located in the front left part of the engine compartment (looking from the front), near the shock absorber …read all…
Posted on 21 August 2023 by ScegliAuto
Toyota Mr2 (1990-2000 / W20, MK 2)
Replacement of the anti-roll bar
The purpose of a device such as the anti-roll bar is to allow the vehicle to protect the system, in order to cushion and minimize all possible impacts. Over …read all…
Posted on 10 August 2023 by ScegliAuto
Toyota Mr2 (1990-2000 / W20, MK 2)
Car positioning on stands
If the car has to be positioned on stands, first of all check the capacity of the stands themselves, or if they are able to withstand the weight of the car. At …read all…
Posted on 7 August 2023 by ScegliAuto
Anti roll bar (1) Checks and maintenance (2) Oil filter (1) Engine oil (1) Door panel (1) Gear Shift Knob (1) Fuse box (1) Windscreen wipers (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos