Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Prius C Aqua
    4. : Checks and maintenance

Toyota Prius C Aqua - Checks and maintenance

Toyota Prius C Aqua (2011-2021 / MK 1)
How to adjust the time on the Toyota Prius C?
In this tutorial we can see how to adjust the time in the Toyota Prius C, a very simple and quick operation, to be carried out for example after disconnecting …read all…
Posted on 10 April 2024 by ScegliAuto
Toyota Prius C Aqua (2011-2021 / MK 1)
How do you reset the Service light on the Toyota Prius C?
In order to reset the Service light of the Toyota Prius C, you need to turn on the instrument panel by turning the ignition key inside the ignition switch: …read all…
Posted on 13 March 2024 by ScegliAuto
Toyota Prius C Aqua (2011-2021 / MK 1)
How to clean the fan filter in Toyota Prius C Aqua?
Cleaning the fan filter in Toyota Prius C Aqua is not a complicated task. On the contrary, it is easy to perform, requires little time and few tools. All you …read all…
Posted on 7 April 2023 by ScegliAuto
Toyota Prius C Aqua (2011-2021 / MK 1)
How to clean the battery terminals of the Toyota Prius C Aqua?
Not everyone knows that there is a very simple way to keep the battery cell terminals on the Toyota Prius C Aqua clean and efficient without spending a lot of …read all…
Posted on 11 September 2022 by ScegliAuto
Air conditioning (1) Battery (1) Key (1) Checks and maintenance (4) Dashboard (1) Air filter (2) Cabin air filter (2) Headlight bulb (2) Rear light bulb (1) Antifreeze liquid (2) Instrument cluster (1) Fuse box (1) Outside rearview mirror (1) Central tunnel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos