Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Bumper of a Toyota Sienna

Model: Toyota Sienna Xl30 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Front bumper

See other generations:
Video tutorial

Today, you will see how to remove the front bumper of a 2013 Toyota Sienna. Start by lifting the bonnet and removing the six plastic retaining clips from the radiator grille, then remove it as shown in the video.

Next, remove the three front retaining clips of the bumper. Once done, continue by removing the four bumper screws found in the wheel arches using an 8mm socket, two screws on each side.

Then, remove all the screws along the bottom edge of the bumper using a 10mm socket. Finally, disconnect the fog light wiring before extracting the bumper.


Updated on 19 October 2026 by ScegliAuto


Related tutorials

How to replace the battery in the remote control of the 2021 Toyota Sienna.
How to replace the battery in the remote control of the 2021 Toyota Sienna.
Toyota Sienna (2021-2026 / Xl40) To correctly replace the battery inside the key of your 2021 Toyota Sienna, simply follow the steps outlined in this new guide. First, purchase a new…
How to replace the key battery in the Toyota Sienna?
How to replace the key battery in the Toyota Sienna?
Toyota Sienna (2004-2010 / Xl20) If you own a Toyota Sienna and want to learn how to correctly replace the key battery, simply follow the steps outlined below. First, obtain a flat s…
Replacing the Battery in the Key Remote of a Toyota Sienna
Replacing the Battery in the Key Remote of a Toyota Sienna
Toyota Sienna (2021-2026 / Xl40) Today's instructions will allow us to disassemble and replace the battery in the key remote of a Toyota Sienna. First, take the remote in hand and st…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos