Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to deactivate the VSC light on the Toyota 4Runner

Model: Toyota 4runner N210 - Years 2002-2009
Part: Warning light – error code

Today's main steps will show us how to reset the VSC light that appears on the instrument panel of the Toyota 4Runner. First, we get on board the vehicle and start locating the OBD port, located low on the driver's side (above the pedals); the video shows the modification to be made in order to reset the VSC light, turning on the instrument panel as shown in the video. The error in question can be disabled through a diagnostic tool, always connected to the OBD port; in this case, it will be necessary to indicate the vehicle and follow the procedure.

Posted on 24 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Disable Traction Control on the Toyota 4Runner?
How to Disable Traction Control on the Toyota 4Runner?
Toyota 4runner (2010-2024 / N280) To disable the traction control on the Toyota 4Runner, start the vehicle by inserting the ignition key into the ignition switch and pressing the corr…
How to Reset the Service Light on a Toyota 4Runner
How to Reset the Service Light on a Toyota 4Runner
Toyota 4runner (2002-2009 / N210) Let's briefly go over the procedure to reset the service light for routine oil change maintenance on a Toyota 4Runner. First, get inside the vehicle …
How to Reset the Oil Light on Your Toyota 4Runner
How to Reset the Oil Light on Your Toyota 4Runner
Toyota 4runner (2010-2024 / N280) To eliminate the maintenance warning light without directly intervening on the vehicle, you must manually reset the light. First, turn on the ignitio…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos