Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Toyota 4Runner?

Model: Toyota 4runner N210 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Service warning light

See other generations:
Video tutorial

As we can see in this tutorial, resetting the service light on a Toyota 4Runner is very simple. Of course, this procedure should only be performed after completing all required maintenance work.

To do this, start by inserting the key and turning on the instrument cluster, not the engine, then set the odometer display to "ODO". Next, turn off the cluster and turn it back on while holding down the "RESET" button, located above the one used previously.

Keep it pressed until the maintenance light goes off completely.


Updated on 17 June 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Toyota 4Runner?
How to Reset the Service Light on a Toyota 4Runner?
Toyota 4runner (2002-2009 / N210) .. In this tutorial, you will learn how to reset the service light on a Toyota 4Runner. This operation is extremely simple and quick, and.. …
How to Reset the Service Light on a Toyota 4Runner
How to Reset the Service Light on a Toyota 4Runner
Toyota 4runner (2002-2009 / N210) Let's briefly go over the procedure to reset the service light for routine oil change maintenance on a Toyota 4Runner. First, get inside the vehicle …
How to Reset the Maintenance Light on a 2019 Toyota 4Runner
How to Reset the Maintenance Light on a 2019 Toyota 4Runner
Toyota 4runner (2010-2024 / N280) If the maintenance light appears on the instrument cluster of your 2019 Toyota 4Runner even after servicing at an authorized center, follow this proc…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos