Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Toyota 4Runner

Model: Toyota 4runner N210 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Service warning light

See other generations:
Video tutorial

Let's briefly go over the procedure to reset the service light for routine oil change maintenance on a Toyota 4Runner. First, get inside the vehicle and turn the ignition key to the 'On' position.

Then, press the button located on the right side of the instrument panel, holding it for about ten seconds to reset the maintenance light, as shown in the video. At this point, turn off the ignition and start the engine, completing the service reset!


Updated on 2 July 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Toyota 4Runner?
How to Reset the Service Light on a Toyota 4Runner?
Toyota 4runner (2002-2009 / N210) As we can see in this tutorial, resetting the service light on a Toyota 4Runner is very simple. Of course, this procedure should only be performed af…
How to reset the service light on the Toyota 4Runner?
How to reset the service light on the Toyota 4Runner?
Toyota 4runner (2002-2009 / N210) Resetting the service in the Toyota 4Runner, as we can see in this tutorial, is an extremely simple and quick operation. Before proceeding, we must h…
How to Reset the Service Light on a Toyota 4Runner?
How to Reset the Service Light on a Toyota 4Runner?
Toyota 4runner (2010-2024 / N280) Resetting the service light on a Toyota 4Runner, as we can see in this tutorial, is an extremely simple and quick operation. Before proceeding, ensur…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos