Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Toyota 4Runner?

Model: Toyota 4runner N280 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Service warning light

See other generations:
Video tutorial

Resetting the service light on a Toyota 4Runner, as we can see in this tutorial, is an extremely simple and quick operation. Before proceeding, ensure that you have completed all scheduled maintenance tasks.

Start by entering the cabin, then insert the key and turn on the ignition. Next, access the trip odometer "Trip A" using the "ODO/TRIP" button located on the dashboard, turn off the ignition, then turn it back on while holding down the same button, and keep it pressed for the time necessary for the service light to reset correctly.


Posted on 21 February 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Toyota 4Runner
How to Reset the Service Light on a Toyota 4Runner
Toyota 4runner (2002-2009 / N210) Let's briefly go over the procedure to reset the service light for routine oil change maintenance on a Toyota 4Runner. First, get inside the vehicle …
How to Reset the Service Light on a Toyota 4Runner?
How to Reset the Service Light on a Toyota 4Runner?
Toyota 4runner (2002-2009 / N210) .. In this tutorial, you will learn how to reset the service light on a Toyota 4Runner. This operation is extremely simple and quick, and.. …
How to Reset the Service Light on the Toyota 4Runner?
How to Reset the Service Light on the Toyota 4Runner?
Toyota 4runner (2002-2009 / N210) In this video, see how to reset the service light on the Toyota 4Runner, a very simple and quick operation to perform after completing the scheduled …

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos