Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Toyota 4Runner?

Model: Toyota 4runner N210 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Warning light – error code

See other generations:
Video tutorial

In this video, see how to reset the service light on the Toyota 4Runner, a very simple and quick operation to perform after completing the scheduled maintenance tasks outlined in the manual. First, turn on the ignition.

Then, press the button located on the right, under the speedometer, and set the odometer to "trip A" mode. At this point, remove the key, hold down the same button, and simultaneously turn the ignition back on. A countdown will appear on the display, after which the maintenance interval will be reset.


Updated on 2 June 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Toyota 4Runner
How to Reset the Service Light on a Toyota 4Runner
Toyota 4runner (2002-2009 / N210) Let's briefly go over the procedure to reset the service light for routine oil change maintenance on a Toyota 4Runner. First, get inside the vehicle …
How to Reset the Service Light on a Toyota 4Runner?
How to Reset the Service Light on a Toyota 4Runner?
Toyota 4runner (2002-2009 / N210) In this tutorial, you will learn how to reset the service light on a Toyota 4Runner. This operation is extremely simple and quick, and should only be…
How to Reset the Service Light on a Toyota 4Runner?
How to Reset the Service Light on a Toyota 4Runner?
Toyota 4runner (2010-2024 / N280) In this tutorial, you will see how to reset the service light on a Toyota 4Runner. This operation is extremely simple and quick, and should be done o…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos