Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the maintenance light on the 2015 Toyota RAV4

Model: Toyota Rav 4 MK 4, Xa40 - Years 2013-2018
Part: Warning light – error code

In the following guide, we will describe step by step all the various steps required to correctly reset the maintenance light of your 2015 Toyota RAV4. First of all, enter the car and reach the driver's seat, then locate the "Disp" button located on the lower right side of the steering wheel and hold it down. At the same time, insert the key and turn on the instrument panel. At this point, wait for the display on the panel to stop flashing and, finally, release the "Disp" button to complete the reset procedure.

Posted on 27 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the low tire pressure warning light on a Toyota Rav4?
Toyota Rav 4 (2013-2018 / MK 4, Xa40) Good morning, today we are here to reset the low tire pressure warning light on our Toyota RAV4. Before we begin, we will need to inflate all the car…
How to Reset the Oil Light of the 2023 Toyota RAV4
How to Reset the Oil Light of the 2023 Toyota RAV4
Toyota Rav 4 (2019-2026 / Xa50, MK 5) If you want to know how to manually reset the oil light of your new 2023 Toyota RAV4, follow these steps. First, turn on the ignition and press the m…
How to Reset the Service Light on a Toyota RAV4?
How to Reset the Service Light on a Toyota RAV4?
Toyota Rav 4 (2013-2018 / MK 4, Xa40) On the Toyota RAV4, after completing scheduled maintenance, you need to manually reset the relevant warning light. Start by turning on the instrument…

Other guides you may be interested in

    Frequently Asked Questions

    • Rav 4 2006-2013 - What does the Toyota Rav4 P / S warning light mean? Read answer

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos