Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install a Sat Nav Radio in a 2005 Yaris 1400 Diesel

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Car stereo

See other generations:
Video tutorial

If you want to replace the factory radio with one that has a satellite navigation system, first ensure that you are choosing a product compatible with your car, meaning no modifications to the mounting space are necessary; likewise, check that the device comes with the wiring harness to fit the original system's connectors.

With that said, detach and remove the two side trims of the centre console to access the screws securing the radio and extract it along with the frame that also houses the air vents.

Disconnect the radio from the frame and insert the new device, apply the wiring harness and complete the installation.


Updated on 26 February 2026 by ScegliAuto


Related tutorials

Replace Car Stereo on Toyota Yaris
Replace Car Stereo on Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Is the car stereo damaged or do you simply want to replace it? Here’s how to remove the stereo on a second-generation Yaris. Remove the trim panel at…
Replacing the Stereo in a Toyota Yaris
Replacing the Stereo in a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Is the stereo damaged? Remove the lower plastic trim from the stereo; use a plastic lever to detach it from the central dashboard (where the air cond…
How to Remove the Car Radio on Yaris
How to Remove the Car Radio on Yaris
Toyota Yaris (1999-2005 / Xp10) Replace the car radio on your Toyota Yaris if you want to install a new one or if it is damaged. Remove the upper central plastic piece from the dash…

    Frequently Asked Questions

    • Yaris 2005-2011 - How much does an AUX cable cost for the 2006 Toyota Yaris? Read answer

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos