Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Stereo in a Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Car stereo

See other generations:
Video tutorial

Is the stereo damaged? Remove the lower plastic trim from the stereo; use a plastic lever to detach it from the central dashboard (where the air conditioning knobs are located). Remove the plastics from the top of the stereo.

Once the stereo is free from constraints, use a screwdriver to unscrew the securing screws located on either side. Pull the stereo out by hand and disconnect the cables (power and antenna).

To reassemble, reverse the disassembly steps. If you are installing a non-original stereo, you will need to fit the appropriate adapters.


Updated on 19 March 2026 by ScegliAuto


Related tutorials

How to Remove the Air Conditioning Knobs and Stereo from a Toyota Yaris
How to Remove the Air Conditioning Knobs and Stereo from a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) How to remove the air conditioning knobs and stereo from your Toyota Yaris and don’t know how to do it? In this video, we will show you how to remove…
Replace Car Stereo on Toyota Yaris
Replace Car Stereo on Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Is the car stereo damaged or do you simply want to replace it? Here’s how to remove the stereo on a second-generation Yaris. Remove the trim panel at…
Removing the Radio from a Toyota Yaris
Removing the Radio from a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) Replace the radio in a Toyota Yaris if it is damaged or worn out. Let's look at the disassembly. Remove the ventilation knobs and take off the coveri…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2005-2011 - How much does an AUX cable cost for the 2006 Toyota Yaris? Read answer

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos