Do it yourself
Frequently asked questions about cars and motorcycles

Replace Car Stereo on Toyota Yaris

Model: Toyota Yaris Xp90 - Years 2005-2011
Part: Car stereo

Is the car stereo damaged or do you simply want to replace it? Here’s how to remove the stereo on a second-generation Yaris. Remove the trim panel at the bottom of the stereo; use a plastic lever to detach it from the centre console (where the air conditioning knobs are located). Remove the trim pieces at the top of the stereo (the trims are all intact from top to bottom). Unscrew the securing screws with a screwdriver located at the sides of the stereo. Pull the stereo out by hand and disconnect the cables (power and antenna). If you are installing a non-original stereo, you will need to fit the appropriate adapters. Turn on the new stereo and check if it works.

Updated on 19 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Toyota Yaris (2005-2011 / Xp90) Let's see how to replace the radio in the Toyota Yaris with all the covering pieces of the central dashboard. Remove the radio trim frame with a plas…
Toyota Yaris (2005-2011 / Xp90) Today, you will see the steps to remove the car radio from a second-generation Toyota Yaris. First, get inside the car and remove the side trims and …
Toyota Yaris (1999-2005 / Xp10) Is the radio in your Toyota Yaris due for replacement? Let's go through the disassembly. Remove the air conditioning knobs; unscrew the securing scre…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2011-2019 - Why does the Toyota Yaris car radio not work? Read answer
    • Yaris 2005-2011 - How much does an AUX cable cost for the 2006 Toyota Yaris? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos