Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Position Light Bulbs in a Toyota Yaris?

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight bulb

See other generations:
Video tutorial

In this tutorial, you will see how to replace the front headlight bulbs in a Toyota Yaris, a very simple and quick operation. First, ensure that the key is not in the ignition for safety.

Then, open the bonnet and locate the lower bulb holder at the back of the headlamp in question. Next, grasp the bulb holder, twist it slightly anti-clockwise, and pull it out of the housing.

At this point, disconnect the old bulb, connect the replacement, reassemble everything, and repeat the operation on the opposite side if necessary.


Updated on 27 October 2026 by ScegliAuto


Related tutorials

How to Replace the Side Lights on the Toyota Yaris?
How to Replace the Side Lights on the Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) As shown in this tutorial, replacing the side light bulbs on the Toyota Yaris is a very simple and quick task. Before proceeding, ensure the key is n…
How to Replace the Number Plate Bulbs on the Toyota Yaris
How to Replace the Number Plate Bulbs on the Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) These brief steps will show you how to dismantle and replace the number plate bulbs on the Toyota Yaris, following the instructions below. First, mov…
Replacement of the front headlight and bulbs of the Toyota Yaris
Replacement of the front headlight and bulbs of the Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) Below we will discover the instructions that will allow us to disassemble and replace the front headlight and its bulbs of the Toyota Yaris. First, l…

Other guides you may be interested in

How to reset the service light on a Lancia Ypsilon?

When the service light comes on in a Lancia Ypsilon, as with any vehicle, it indicates that the car needs servicing, including an oil change and oil filter replacement. The vehicle shown in the video, the Lancia Ypsilon, can be easily maintained by yourself; changing the engine oil is not a complex task, nor is resetting the aforementioned light. Here’s the reset procedure: Turn on the ignition, press the accelerator pedal down, and press the brake pedal seven times. After this, wait sixty seconds, release the accelerator, and turn off the ignition. Reset completed.

Watch the video!


by ScegliAuto

More videos