Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Side Lights on the Toyota Yaris?

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Headlight bulb

See other generations:
Video tutorial

As shown in this tutorial, replacing the side light bulbs on the Toyota Yaris is a very simple and quick task. Before proceeding, ensure the key is not in the ignition for safety.

Start by turning the wheel towards the side you will be working on, then locate the indicated screw, remove it, and move the inner wheel arch cover. Next, grasp the bulb holder, turn it counter-clockwise, and pull it out of the housing.

At this point, insert the replacement bulb and reassemble everything by following the reverse procedure.


Updated on 18 June 2026 by ScegliAuto


Related tutorials

How to Replace the Fog Lights on a Toyota Yaris
How to Replace the Fog Lights on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) To remove the fog lights on a Toyota Yaris, use a flathead screwdriver to lever and lift the grille around the light, disengaging its retaining clips…
How to Replace the Courtesy Light Bulb in the Toyota Yaris
How to Replace the Courtesy Light Bulb in the Toyota Yaris
Toyota Yaris (2020-2026 / MK 4) First, switch off the ceiling lights located in the centre of the cabin to prevent overheating. Next, remove the plastic cover that conceals the bulb…
How to Replace the Dipped Beam Bulb on a Toyota Yaris
How to Replace the Dipped Beam Bulb on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) This short video tutorial shows how to change the dipped beam bulb on a second-generation Toyota Yaris, produced from 2005 to 2011. First, open the b…

Other guides you may be interested in

How to reset the service light on a Lancia Ypsilon?

When the service light comes on in a Lancia Ypsilon, as with any vehicle, it indicates that the car needs servicing, including an oil change and oil filter replacement. The vehicle shown in the video, the Lancia Ypsilon, can be easily maintained by yourself; changing the engine oil is not a complex task, nor is resetting the aforementioned light. Here’s the reset procedure: Turn on the ignition, press the accelerator pedal down, and press the brake pedal seven times. After this, wait sixty seconds, release the accelerator, and turn off the ignition. Reset completed.

Watch the video!


by ScegliAuto

More videos