Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Tire pressure reset on a Toyota RAV4 Hybrid

Model: Toyota Rav 4 MK 4, Xa40 - Years 2013-2018
Part: Checks and maintenance

Thanks to this very short video guide today you will be able to see the entire step-by-step procedure to reset the tire pressure on your 2018 Toyota Rav4 hybrid model. Before performing this operation, it is necessary to check the correct pressure of all four tires as indicated by the manufacturer, this pressure is shown on a sticker placed on the driver's side door pillar, but let's see the procedure now. Start by turning on the vehicle's ignition but without starting the engine, then press and hold the reset button, located under the dashboard on the driver's side, and release it when the pressure light flashes three times, finally restart the vehicle.

Posted on 5 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure light in the Toyota RAV4?
How to reset the tire pressure light in the Toyota RAV4?
Toyota Rav 4 (2013-2018 / MK 4, Xa40) In this tutorial, we can see how to reset the tire pressure light in the Toyota RAV4, an extremely simple and quick operation, to be done only once t…
How to reset the tire pressure light in the Toyota RAV4?
How to reset the tire pressure light in the Toyota RAV4?
Toyota Rav 4 (2019-2026 / Xa50, MK 5) In this tutorial, we can see how to reset the tire pressure light in the Toyota RAV4, an extremely simple and quick operation, to be done only after …
How to reset the tire pressure light in the Toyota RAV4?
How to reset the tire pressure light in the Toyota RAV4?
Toyota Rav 4 (2019-2026 / Xa50, MK 5) In this tutorial, we can see how to reset the tire pressure light in the Toyota RAV4, a very simple and quick operation, to be carried out only once …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos