Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Engine Warning Light on the Toyota Prius

Model: Toyota Prius MK 3, Xw50 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Warning light – error code

See other generations:
Video tutorial

This guide will show you the procedure to reset the engine warning light on the Toyota Prius. Before connecting the diagnostic tool, ensure that the issue causing the engine warning light to illuminate has been resolved.

Get inside the vehicle and turn on the ignition, then connect the diagnostic software. Follow the guided procedure to confirm and execute the reset of the engine fault light, as shown in the video.

Now, turn off the ignition and disconnect the diagnostic tool, finally starting the engine!


Updated on 29 October 2026 by ScegliAuto


Related tutorials

How to Reset the Maintenance Light on a Toyota Prius
How to Reset the Maintenance Light on a Toyota Prius
Toyota Prius (2004-2009 / MK 1) To correctly and safely reset the maintenance light on your Toyota Prius, follow these steps. Start by turning on the instrument panel of the car, th…
How to Reset the Tyre Warning Light on a Toyota Prius?
How to Reset the Tyre Warning Light on a Toyota Prius?
Toyota Prius (2004-2009 / MK 1) Resetting the tyre warning light on a Toyota Prius, as shown in this tutorial, is an extremely simple and quick operation. Before doing this, ensure …
How to Reset the Tyre Pressure Warning Light on a Toyota Prius?
How to Reset the Tyre Pressure Warning Light on a Toyota Prius?
Toyota Prius (2004-2009 / MK 1) To reset the tyre pressure warning light on a Toyota Prius, first inflate the tyres to the correct pressure. This value is indicated on the sticker a…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos