Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Start a Toyota Corolla with a Flat Key Fob

Model: Toyota Corolla MK 5, E210 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Key

See other generations:
Video tutorial

In this video, see how to get in and start a Toyota Corolla with a flat key fob. If you have the "comfort access" feature, you should be able to open the door simply by putting your hand inside the handle, but with a flat key fob, this won't work. However, at the top of the key fob, there is a small button.

Pull it out while simultaneously pulling up the keyring loop to extract the physical key, which can be used in the driver’s door, which has a physical lock. Open the car, and once inside, press the start button.

The car will indicate what to do: press the brake pedal and place the key fob against the start button. At this point, the car will start.


Updated on 2 November 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery of the Toyota Corolla Verso
How to Replace the Key Battery of the Toyota Corolla Verso
Toyota Corolla (2013-2019 / E160, E170, MK 4) If the key for your Toyota Corolla Verso is not working and the cause is a completely dead battery, the solution is simple and cost-effective. Below,…
How to Replace the Battery in a Toyota Corolla 4
Toyota Corolla (2013-2019 / E160, E170, MK 4) If the key for your Toyota Corolla fourth generation (2013-2019) has suddenly stopped working due to a flat battery and you want to learn how to repl…
How to Replace the Remote Battery of the Toyota Corolla?
How to Replace the Remote Battery of the Toyota Corolla?
Toyota Corolla (2013-2019 / E160, E170, MK 4) In this video, you will see how to replace the flat battery of the remote for the Toyota Corolla MK4. This is a very simple operation; you will only …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos