Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure warning light on the Toyota RAV 4

Model: Toyota Rav 4 MK 3, Xa30 - Years 2006-2013
Part:

The instructions in this guide will show us the process of resetting the tire pressure warning on the Toyota RAV 4; before resetting the TPMS sensors, it is necessary for all four tires to be at the correct pressure. So, we get into the car, on the driver's side, and start the instrument panel; then we press and hold the TPMS reset button located below, above the pedals, as shown in the video. We then wait for the tire pressure warning to be reset on the instrument panel!

Posted on 14 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure light on the Toyota RAV4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) The ignition of the tire pressure warning light indicates a possible puncture or loss of pressure; let's see how to reset the TPMS light on the Toyot…
How do you reset the tire pressure light of the Toyota RAV 4?
How do you reset the tire pressure light of the Toyota RAV 4?
Toyota Rav 4 (2013-2018 / MK 4, Xa40) The tire pressure warning light that appears on the instrument panel of the Toyota RAV 4 can be reset by inflating all tires to the recommended press…
How do you reset the tire pressure light on the Toyota RAV 4?
How do you reset the tire pressure light on the Toyota RAV 4?
Toyota Rav 4 (2013-2018 / MK 4, Xa40) To reset the tire pressure warning light of the Toyota RAV 4, first inflate the tires to the optimal pressure value: this value is indicated on the s…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos