Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fog light bulb of the Toyota Yaris

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Fog lights

See other generations:
Video tutorial

The following video tutorial shows us the steps to replace the front fog light bulb of the 2013 Toyota Yaris. To replace the bulb, we need to remove the plastic clips located on the bottom of the fender.

After removing the clips, it is possible to move the fender plastic to insert our hand inside the compartment and disconnect the bulb from the connector. Connect the new bulb to the connector and reinsert it inside.

Close the plastic cover and secure it with the clips. Repeat the same steps to replace the bulb of the right front fog light.


Posted on 14 January 2025 by ScegliAuto


Related tutorials

How to Replace the Fog Light on a Toyota Yaris?
How to Replace the Fog Light on a Toyota Yaris?
Toyota Yaris (2011-2019 / Xp130) To replace the fog light on a Toyota Yaris, use a tool like a screwdriver to pry off the cover surrounding the corresponding fog light. This will all…
How to Replace the Third Brake Light Bulb on a Toyota Yaris
How to Replace the Third Brake Light Bulb on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) To replace the third brake light bulb on a Toyota Yaris, open the rear hatch to access the interior: here you will find the hole containing the conne…
How to Replace the Dipped Beam Bulb on a Toyota Yaris?
How to Replace the Dipped Beam Bulb on a Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) To replace the dipped beam bulb on your Toyota Yaris, start by opening the bonnet and securing it with the prop rods. Locate the headlamp where the b…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos