Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to adjust the handbrake in the Toyota Corolla Verso?

Model: Toyota Verso MK 3 - Years: 2004, 2005, 2006, 2007, 2008, 2009
Part: Parking brake

See other generations:
Video tutorial

In this tutorial we can see how to adjust the handbrake in the Toyota Corolla Verso, an extremely simple and quick operation. First of all, we park the vehicle in a flat place with the first gear engaged, then we locate the two bolts in the central glove compartment and unscrew them using a 10mm socket wrench.

Then we unclip the rear panel of the tunnel using a plastic spatula, remove the compartment, locate the adjustment nut and tighten it with a 10mm wrench until reaching the desired tension level.


Posted on 18 January 2025 by ScegliAuto


Related tutorials

How to Adjust the Handbrake on a Toyota Verso
How to Adjust the Handbrake on a Toyota Verso
Toyota Verso (2009-2018 / MK 4) You can adjust the handbrake on a Toyota Verso by removing the cover located at the rear of the corresponding lever: once this panel is removed, you …
How to Replace the Bulb of the Rear Headlight of the Toyota Corolla Verso
How to Replace the Bulb of the Rear Headlight of the Toyota Corolla Verso
Toyota Verso (2004-2009 / MK 3) Today's guide will show you how to remove and replace the bulb of the rear headlight of the Toyota Corolla Verso by following the instructions below.…
How to Reset the Service Light on a Toyota Corolla Verso?
How to Reset the Service Light on a Toyota Corolla Verso?
Toyota Verso (2004-2009 / MK 3) To reset the Service light on a Toyota Corolla Verso, turn on the instrument panel by inserting the ignition key into the ignition switch. Once the p…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos