Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you deactivate the alarm of the Toyota?

Model: Toyota Toyota Various
Part: Checks and maintenance

To deactivate the alarm of Toyota vehicles, you need to connect a diagnostic tool to the OBD port of the vehicle: this port is located on the dashboard just below the steering column. At this point, you can select the model of the car and its corresponding version: then, following the instructions in the tutorial, you can disable the alarm. After completing the procedure, you must disconnect the scanner from the appropriate port and use the button on the remote control to verify that the alarm has been deactivated.

Posted on 11 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Disable the Pre-Collision System on Toyotas?
How to Disable the Pre-Collision System on Toyotas?
Toyota Toyota Various To disable the Pre-Collision System on a Toyota, turn on the ignition by turning the key in the ignition switch. Once the ignition is on, navigate th…
How do you deactivate the VSC system in Toyota vehicles?
How do you deactivate the VSC system in Toyota vehicles?
Toyota Toyota Various In Toyota cars, the VSC electronic device is responsible for stability control, therefore absolutely important. However, if it needs to be temporaril…
How do you reset the MMT gearbox of Toyota?
How do you reset the MMT gearbox of Toyota?
Toyota Toyota Various To reset the MMT gearbox installed on Toyota vehicles, you will need to turn the key to start the instrument panel, checking that the warning light i…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos