Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you deactivate the VSC system in Toyota vehicles?

Model: Toyota Toyota Various
Part: Checks and maintenance

Video tutorial

In Toyota cars, the VSC electronic device is responsible for stability control, therefore absolutely important. However, if it needs to be temporarily disabled, for example for testing during maintenance operations or other reasons, it can be done following the video published above: Turn on the dashboard, engage the parking brake, press the brake pedal twice, release the parking brake mentioned earlier, press and hold the brake pedal again, engage and disengage the parking brake twice.

Finally, press the brake pedal twice again. Operation completed.


Posted on 17 April 2025 by ScegliAuto


Related tutorials

How is the Vsc fault identified in Toyota cars?
How is the Vsc fault identified in Toyota cars?
Toyota Toyota Various The Vsc warning light identifies a problem related to the vehicle's stability, specifically the electronic control system that manages the various se…
What Does the TRAC OFF Light Mean on a Toyota?
What Does the TRAC OFF Light Mean on a Toyota?
Toyota Toyota Various If you notice the TRAC OFF light illuminating on your Toyota's dashboard, it means you have pressed the TRAC OFF button located on the left side of t…
How to Disable the Hybrid System on Toyota?
How to Disable the Hybrid System on Toyota?
Toyota Toyota Various To disable the hybrid system on a Toyota, first turn on the instrument cluster by inserting the ignition key into the ignition switch and pressing th…

    Frequently Asked Questions

    • Toyota Vari - What does the "TRC Off" message mean in a Toyota? Read answer

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos