Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disable the Hybrid System on Toyota?

Model: Toyota Toyota Various
Part: Checks and maintenance

Video tutorial

To disable the hybrid system on a Toyota, first turn on the instrument cluster by inserting the ignition key into the ignition switch and pressing the start button. Once the dashboard is lit, shift the gear selector from position P to position N. Then, press the accelerator pedal three times.

After this, shift the selector back to position P and press the pedal three more times. Once completed, you can turn off the ignition and turn it back on to check that the system is disabled.


Updated on 8 October 2026 by ScegliAuto


Related tutorials

How to Activate or Deactivate Traction Control on Toyota Cars
How to Activate or Deactivate Traction Control on Toyota Cars
Toyota Toyota Various This guide shows how to activate or deactivate the traction control (TRC or ESP) on Toyota cars. This system activates every time the vehicle is star…
How to Disable the Seatbelt Alarm on a Toyota
How to Disable the Seatbelt Alarm on a Toyota
Toyota Toyota Various The audible signal reminding the driver and all passengers to wear their seatbelt is very important and should only be disabled during maintenance of…
How do you deactivate the VSC system in Toyota vehicles?
How do you deactivate the VSC system in Toyota vehicles?
Toyota Toyota Various In Toyota cars, the VSC electronic device is responsible for stability control, therefore absolutely important. However, if it needs to be temporaril…

Other guides you may be interested in

    Frequently Asked Questions

    • Toyota Vari - What does the "TRC Off" message mean in a Toyota? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos