Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Toyota Hilux?

Model: Toyota HiLux MK 7, An10, An20, An30 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Service warning light

See other generations:
Video tutorial

The Service indicator that appears on the instrument panel of the Toyota Hilux can be reset by turning on the instrument panel and then repeatedly pressing the ODO TRIP button until the display reads "Trip A". Once this message is displayed, you can turn off the instrument panel and hold down the same button again: while keeping it pressed, you can insert the ignition key and turn it to start the instrument panel.

By holding down the button, you will notice that after a few seconds the indicator light will turn off, finally turning off the instrument panel.


Posted on 15 February 2025 by ScegliAuto


Related tutorials

How do you reset the Service light on the Toyota Hilux?
Toyota HiLux (2015-2024 / MK 8, An130, An120) To reset the Service light that appears on the instrument panel of the Toyota Hilux, you need to turn on the instrument panel by inserting the corres…
How to reset the "Service" indicator on a Toyota Hilux?
How to reset the "Service" indicator on a Toyota Hilux?
Toyota HiLux (2015-2024 / MK 8, An130, An120) To reset the "Service" light on the Toyota Hilux, start by turning on the instrument panel without starting the engine. Using the buttons on the stee…
Resetting the Service Light on the Toyota Hilux
Resetting the Service Light on the Toyota Hilux
Toyota HiLux (2015-2024 / MK 8, An130, An120) This guide provides instructions to reset the service light for routine maintenance on the Toyota Hilux. First, get in the vehicle and turn on the ig…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos