Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to open the trunk of the Toyota Corolla Hybrid

Model: Toyota Corolla MK 5, E210 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026

See other generations:
Video tutorial

Today we will explain how to open the trunk of the new generation Toyota Corolla Hybrid. On almost all Toyota models, a sensor has been installed that allows for the external opening of the trunk using your foot.

To perform this operation, you need to pass your foot along the lower edge of the trunk from left to right. To close the trunk using your feet, you can use the same steps, passing your foot under the edge from left to right.

However, the manual internal opening remains by pressing the button on the side dashboard below the steering wheel.


Posted on 18 March 2025 by ScegliAuto


Related tutorials

How to open the front hood of the Toyota Corolla
How to open the front hood of the Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) Today we will explain how to open the front hood of the Toyota Corolla hybrid. To open the front hood, first we need to open the door on the left sid…
How to Open the Boot from Inside a Toyota Corolla
How to Open the Boot from Inside a Toyota Corolla
Toyota Corolla (2013-2019 / E160, E170, MK 4) Not everyone knows that you can open the boot of a Toyota Corolla from the inside. There is a lever located inside the vehicle that, when pressed out…
How to reset the service in the Toyota Corolla Hybrid?
How to reset the service in the Toyota Corolla Hybrid?
Toyota Corolla (2019-2026 / MK 5, E210) In this tutorial, we can see how to reset the service in the Toyota Corolla Hybrid, an extremely simple and quick operation, to be carried out only o…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos