|
Do it yourself
| |||
| ||||
How to reset the "Service" light on a Toyota Rav4?
Model: Toyota Rav 4
Xa20, MK 2
- Years 2000-2006
To reset the "Service" light on a Toyota Rav4, start by turning on the instrument panel without starting the engine. Use the button located under the instrument panel to access the onboard menu. By pressing this button repeatedly, scroll through the options until you find the one related to maintenance or service intervals. When you reach the appropriate menu, hold down the button for a few seconds until you see the option to reset the "Service" light. At that point, confirm by holding down the button until the system notifies you that the reset has been successful. The "Service" light will turn off, confirming that the new maintenance interval has been recorded. After performing the reset, it is advisable to check if the operation was successful by turning off and on the instrument panel. If the light remains on, carefully repeat the steps. This process is used to zero out the maintenance interval, allowing the system to properly monitor future service deadlines.
Posted on 11 April 2025 by ScegliAuto
Video tutorial
Related tutorials
Toyota Rav 4
(2019-2026 /
Xa50, MK 5)
To reset the "Service" light on a Toyota RAV4, turn on the instrument panel without starting the engine. Use the buttons on the steering wheel to nav…
Toyota Rav 4
(2019-2026 /
Xa50, MK 5)
To reset the "Service" light on a Toyota RAV4, you can use the buttons on the steering wheel to access the settings menu. Once in the menu, look for …
Toyota Rav 4
(2019-2026 /
Xa50, MK 5)
If you want to know how to manually reset the oil light of your new 2023 Toyota RAV4, follow these steps. First, turn on the ignition and press the m…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Connect the Cables to the Battery of the Citroen Xsara Picasso?
In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.058
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
