|
Do it yourself
| |||
| ||||
How do you use the Cruise control on the Toyota Rav 4 MK5?
Model: Toyota Rav 4
Xa50, MK 5
- Years 2019-2026
In this video, we see how to use the adaptive Cruise Control on the Toyota Yaris Cross: this way, our car will automatically decelerate when approaching the vehicle in front of us, to adjust to its speed, without having to press the brake or change the Cruise settings; once it is safe to proceed at a higher speed, the device will accelerate and return automatically to the set speed: on the vehicle in the video, the controls are located on the right side of the steering wheel; let's turn it on and accelerate to the desired speed; it is also possible to decrease or increase the speed using the buttons on the controls. The button with the three lines allows us to set the distance we want to keep with the vehicle in front of us; the default setting is the largest one. When we activate the component, we see a green icon on the right side of the display, and it can only be activated at a speed higher than 50 km/h, then we set the distance we want to keep with the vehicle in front of us, and then activate the function. If we want to switch to normal constant speed mode, we will have to hold down the Cruise power button, and we will notice that the icon changes, taking on the well-known appearance of the cruise control.
Posted on 27 April 2025 by ScegliAuto
Video tutorial
Related tutorials
Toyota Rav 4
(2019-2026 /
Xa50, MK 5)
Today's video will show us the instructions that will allow us to set the cruise control on the Toyota RAV 4, in simple steps. In order to activate t…
Toyota Rav 4
(2019-2026 /
Xa50, MK 5)
Below we will see the instructions that will allow us to set the cruise control of the Toyota RAV 4. First of all, let's locate the cruise control ad…
Toyota Rav 4
(2019-2026 /
Xa50, MK 5)
It will be possible to activate the cruise control of the Toyota RAV 4 by first reaching the cruising speed that you want to maintain constant: once …
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.068
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |