Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disconnect the battery of the Toyota Yaris Hybrid

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Battery

See other generations:
Video tutorial

Today we will explain how to disconnect the battery on a Toyota Yaris Hybrid car. The battery in question is 12 volts. To perform this operation, we need to open the front hood and remove the black cover of the battery, releasing the clips on the sides.

We then disconnect the white electrical connector located next to the negative and positive terminals. By doing this, you can perform airbag or fuse replacement operations without causing damage to the vehicle.

Once the operation is completed, reconnect the electrical connector to resume the normal functioning of the car.


Posted on 24 May 2025 by ScegliAuto


Related tutorials

How to Replace the Battery on a Toyota Yaris Hybrid?
How to Replace the Battery on a Toyota Yaris Hybrid?
Toyota Yaris (2011-2019 / Xp130) To replace the battery on a Toyota Yaris Hybrid, loosen the screws securing the rear seat bench of the car. By loosening these screws, the bench can …
Where is the Battery Located in the Toyota Yaris Hybrid?
Where is the Battery Located in the Toyota Yaris Hybrid?
Toyota Yaris (2020-2026 / MK 4) The battery in the Toyota Yaris Hybrid is located inside the cabin, specifically just under the rear passenger seats. To access it, you need to remov…
How to Replace the Remote Battery on a Toyota Yaris Hybrid?
How to Replace the Remote Battery on a Toyota Yaris Hybrid?
Toyota Yaris (2011-2019 / Xp130) You can replace the remote battery on a Toyota Yaris Hybrid by prying open the side of the device with an object, allowing you to detach the rear pan…

    Frequently Asked Questions

    • Yaris 2011-2019 - How much does it cost to replace the batteries in the Toyota Yaris Hybrid in the UK? Read answer

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos