Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace a headlight bulb in a 2005 Toyota Yaris?

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Headlight bulb

See other generations:
Video tutorial

For those who will watch this video tutorial, they will not only be able to understand how to disassemble the front headlight of the Toyota Yaris 2005, but also how to replace one of the bulbs. Regarding the headlight, the topic at hand, it is necessary to unscrew the side and top fixing pins, while to access and disassemble the bottom one, it is necessary to remove the bumper, a job for which you need to access underneath it, where we find a first pin and behind, inserting the hand behind the wheel arch.

Once this is done, all that remains is to disconnect the power connector of the aforementioned bulbs, thus being able to extract the optical group from its seat.


Posted on 27 May 2025 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb on a Toyota Yaris
How to Replace the Front Headlight Bulb on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) This short video will show you how to remove and replace the front headlight bulb on a Toyota Yaris, following these simple steps. First, open the bo…
Replacing the Front Headlamp Bulb on the Toyota Yaris
Replacing the Front Headlamp Bulb on the Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) This guide will outline the steps and instructions for removing and replacing the front headlamp bulb on the Toyota Yaris. First, open the bonnet of …
Replacing the Rear Headlamp Bulb on a Toyota Yaris
Replacing the Rear Headlamp Bulb on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) Today, learn how to remove and replace the rear headlamp bulb on a first-generation Toyota Yaris. First, open the boot and remove the plastic side co…

Other guides you may be interested in

How to reset the service light on a Lancia Ypsilon?

When the service light comes on in a Lancia Ypsilon, as with any vehicle, it indicates that the car needs servicing, including an oil change and oil filter replacement. The vehicle shown in the video, the Lancia Ypsilon, can be easily maintained by yourself; changing the engine oil is not a complex task, nor is resetting the aforementioned light. Here’s the reset procedure: Turn on the ignition, press the accelerator pedal down, and press the brake pedal seven times. After this, wait sixty seconds, release the accelerator, and turn off the ignition. Reset completed.

Watch the video!


by ScegliAuto

More videos