Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the heating resistor in the Toyota Camry?

Model: Toyota Camry Xv20 - Years: 1997, 1998, 1999, 2000, 2001
Part: Checks and maintenance

See other generations:
Video tutorial

In this tutorial, we can see how to replace the heating resistor in the Toyota Camry, an extremely simple and quick operation. First of all, make sure that the key is not inserted, so that you can work safely, then go to the passenger side and unlock the lower cover of the glove box compartment using a flat-tipped screwdriver.

Then move the carpet, locate the resistor and disconnect the power connector. At this point, all that remains is to unscrew the two fixing screws with a cross-tipped screwdriver, remove the resistor from the housing, and install the replacement.


Posted on 29 May 2025 by ScegliAuto


Related tutorials

How to replace the thermostat in a Toyota Camry?
How to replace the thermostat in a Toyota Camry?
Toyota Camry (1997-2001 / Xv20) In this tutorial, we can see how to replace the thermostat in the Toyota Camry, a very simple and quick operation. First of all, make sure the engine…
How to replace the gear shift knob in a Toyota Camry?
How to replace the gear shift knob in a Toyota Camry?
Toyota Camry (2018-2024 / Xv70) In this tutorial we can see how to replace the gear knob in the Toyota Camry, an extremely simple and quick operation. First of all, let's go inside …
How to replace the exterior rearview mirror in the Toyota Camry?
How to replace the exterior rearview mirror in the Toyota Camry?
Toyota Camry (2006-2013 / Xv40) In this tutorial we can see how to replace the external rearview mirror in the Toyota Camry, an extremely simple and quick operation. First of all, w…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos