Do it yourself
Frequently asked questions about cars and motorcycles

How to fix a false contact on the rear lights of the Toyota Yaris MK1

Model: Toyota Yaris Xp10 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Tail light

See other generations:
Video tutorial

In this video we can see how to fix a problem that can easily occur on this car model: a false contact was causing the reverse light to turn on at the same time as the stop light. The solution was to remove the rear light by simply unscrewing the fixing screw and disconnecting the power cable connector.

All this from the dedicated panel located inside the trunk. The problem was solved by checking the connections and cleaning the oxidized contacts.

One of the contacts was deteriorated, and the youtuber repaired it using a wall hook with a bit of ingenuity; a solution that proved to be effective. Clean the seat and reassemble the light.

Problem solved.


Posted on 26 June 2025 by ScegliAuto


Related tutorials

Toyota Yaris (2005-2011 / Xp90) In today's video tutorial, we will see how to remove and replace the bulbs of the rear brake lights on a Toyota Yaris. First, open the boot and remov…
Toyota Yaris (2020-2026 / MK 4) This tutorial shows how to replace the rear lights on the Toyota Yaris GR, a very simple and quick operation. First, ensure the key is not inserted f…
Toyota Yaris (2005-2011 / Xp90) In this tutorial we can see how to replace the rear lights in the Toyota Yaris, an extremely simple and quick operation. First of all, make sure the …

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos