Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Brake Lights on Toyota Yaris

Model: Toyota Yaris Xp90 - Years 2005-2011
Part: Tail light bulb

In today's video tutorial, we will see how to remove and replace the bulbs of the rear brake lights on a Toyota Yaris. First, open the boot and remove the plastic cover found on the sides, using something sharp in the designated slot. Then access the bulb compartment where we will remove the one we need: to do this, we must disconnect the electrical connector (to remove the light if desired) or we can directly detach the bulb holders which will come out with all the bulbs. Then reassemble everything.

Updated on 27 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Centre Brake Light on Yaris
How to Remove the Centre Brake Light on Yaris
Toyota Yaris (1999-2005 / Xp10) Removing the third brake light on the Yaris? Here’s how to do it. Open the tailgate, and remove the plastic covering the rear light. Unscrew the reta…
Replacement of the rear headlight bulb of the Toyota Yaris
Replacement of the rear headlight bulb of the Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) In a few simple steps, we will see the process of disassembling and replacing the rear light bulbs of the Toyota Yaris. First, we open the rear hatch…
How to Know the Fuse Diagrams for a Toyota Yaris Hybrid
How to Know the Fuse Diagrams for a Toyota Yaris Hybrid
Toyota Yaris (2011-2019 / Xp130) The first fuse box of a Toyota Yaris Hybrid can be found inside the vehicle's cabin, located low on the left under the steering column; this box cont…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos