Do it yourself
Frequently asked questions about cars and motorcycles

Where is the speed sensor located that gives the P0500 error on the Toyota Yaris XP130?

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Checks and maintenance

See other generations:
Video tutorial

In this video we see where the speed sensor that gives the P0500 error on the Toyota Yaris XP130 is located; to find it we need to remove the starter battery, and lean towards the bottom, until we identify a silver-colored circle, held by two cross screws.

This component is the main cause of the P0500 error, which indicates the malfunction of the vehicle's speed sensor, and provides information on the vehicle's speed to the speedometer, regulates the engine power to prevent wheel slippage, helps to maintain control of the vehicle in turns, manages gear changes based on speed for vehicles with automatic transmission, and regulates speed for the cruise control function.

The causes of the error are attributable to: damaged wiring, dirty or damaged sensor, faulty control module (this case is rather rare).


Posted on 3 July 2025 by ScegliAuto


Related tutorials

Toyota Yaris (1999-2005 / Xp10) In this video, see where the airbag collision sensor is located on the Toyota Yaris XP10. The collision sensor is a fundamental component of a vehicl…
Toyota Yaris (2011-2019 / Xp130) In this video, learn how to achieve the best demisting from the air conditioning of the Toyota Yaris XP130: if you enter the car and all the windows …
Toyota Yaris (2011-2019 / Xp130) In this new guide aimed at all of you who want to discover where the fuse box of your Toyota Yaris XP130 is located, you will find a description of a…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2011-2019 - Can I replace the ignition switch on my Toyota Yaris myself? and how much is it? Read answer
    • Yaris 2020-2027 - What problems does the 2020 Toyota Yaris Hybrid have? Read answer

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos