Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the injectors of the Toyota Avensis 2.0 D-4D

Model: Toyota Avensis MK 3, T270 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Fuel injectors

See other generations:
Video tutorial

In this guide, we will see the main instructions on how to disassemble and replace the diesel injectors of the Toyota Avensis 2.0 D-4D. First, we open the hood of the car and start disconnecting the high-pressure tubing of the injectors, unscrewing the bolts; then we disconnect the coil connectors of the injectors, using a socket wrench with an extension to unscrew and remove the injectors, as shown in the video.

At this point, we replace the faulty injectors, installing the new original ones, following the video tutorial until the end!


Posted on 27 August 2025 by ScegliAuto


Related tutorials

Replacing the injectors and seals on the Toyota Avensis 2.0 D-4D
Replacing the injectors and seals on the Toyota Avensis 2.0 D-4D
Toyota Avensis (2003-2008 / T250, MK 2) These brief and simple instructions will show you the main steps to remove and replace the injectors and their seals on the Toyota Avensis 2.0 D-4D. …
Where are the Fuses on a Toyota Avensis?
Where are the Fuses on a Toyota Avensis?
Toyota Avensis (2003-2008 / T250, MK 2) On board the Toyota Avensis, you can locate the fuse boxes that contain the fuses regulating the operation of various devices. This vehicle model has…
Where is the Fuse Box on the Toyota Avensis 3?
Where is the Fuse Box on the Toyota Avensis 3?
Toyota Avensis (2009-2018 / MK 3, T270) In this guide for your Toyota Avensis Mk3 (2009-2018), follow these steps. First, ensure the car is off, then go outside and position yourself at the…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos