Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Avensis
    4. : Where is the fuse box located in the Toyota Avensis 3?

Toyota Avensis - Video tutorial

Model: Toyota Avensis MK 3, T270 - Years 2009-2018
Part: Fuse box
Operation: Where is the fuse box located in the Toyota Avensis 3?

In the following guide dedicated to your Toyota Avensis Mk3 (year 2009-2018), you just need to follow these steps. First of all, make sure that the car is turned off, then go outside and position yourself in front of the hood. At this point, lift the hood completely and then locate the fuse box on the right side of the engine compartment. Remove the protective cover of the box and identify the fuses of your Toyota Avensis Mk3. Disconnect the battery if you intend to work on them in case of electrical faults.


Posted on 15 February 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Avensis 1997-2003 - Where are the Toyota Avensis Mk1 fuse boxes located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos