Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Battery on a Toyota Avensis

Model: Toyota Avensis MK 3, T270 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Battery

See other generations:
Video tutorial

Replace the damaged battery of a Toyota Avensis. Open the front bonnet of the car (the battery is located in the engine compartment) and remove the plastic cover (detach the rivets).

Using a socket spanner, undo the securing bolts of the battery terminals (remove the two opposite poles) and disconnect them. Unscrew the battery securing screws, remove the old battery, and prepare to install a new unit in the engine compartment.

Position the new battery and reconnect the previously disconnected terminals. Tighten the battery securing screws.

Cover the battery with the plastic cover.


Updated on 17 March 2026 by ScegliAuto


Related tutorials

How to disassemble the starter motor of the Toyota Avensis D-4D
How to disassemble the starter motor of the Toyota Avensis D-4D
Toyota Avensis (1997-2003 / MK 1, T220) In this short guide, we will see the main instructions that will allow us to disassemble and replace the starter motor of the Toyota Avensis D-4D. Fi…
How to Remove the Fuel Pump Float on a Toyota Avensis
How to Remove the Fuel Pump Float on a Toyota Avensis
Toyota Avensis (2003-2008 / T250, MK 2) To remove the fuel float pump on a Toyota Avensis, start by disconnecting the battery cables. Then, remove the rear seat from the car: you will find …
Where is the Fuse Box on the Toyota Avensis 3?
Where is the Fuse Box on the Toyota Avensis 3?
Toyota Avensis (2009-2018 / MK 3, T270) In this guide for your Toyota Avensis Mk3 (2009-2018), follow these steps. First, ensure the car is off, then go outside and position yourself at the…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos