Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the starter motor of the Toyota Avensis D-4D

Model: Toyota Avensis MK 1, T220 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Starter motor

See other generations:
Video tutorial

In this short guide, we will see the main instructions that will allow us to disassemble and replace the starter motor of the Toyota Avensis D-4D. First of all, we open the hood and start by disassembling and removing the battery, unscrewing the bracket screw and disconnecting both battery terminals; we find the starter motor underneath, where we will unscrew its fixing screws to remove it (if necessary, access it also from under the car), as shown in the video.

Disconnect the electrical wiring of the starter motor and replace it with the new original one!


Posted on 17 April 2025 by ScegliAuto


Related tutorials

How to replace the starter motor of the Toyota Avensis 2.0 D-4D
How to replace the starter motor of the Toyota Avensis 2.0 D-4D
Toyota Avensis (2009-2018 / MK 3, T270) Today's main steps will illustrate the process of disassembly and replacement of the starter motor of the Toyota Avensis 2.0 D-4D. First, we open the…
Instructions for Replacing the Starter Motor
Instructions for Replacing the Starter Motor
Toyota Avensis (1997-2003 / MK 1, T220) Before proceeding with disassembly, place the vehicle on suitable axle stands and disconnect the battery. Locate the starter motor, which is situated…
How to Remove the Battery on a Toyota Avensis
How to Remove the Battery on a Toyota Avensis
Toyota Avensis (2009-2018 / MK 3, T270) Replace the damaged battery of a Toyota Avensis. Open the front bonnet of the car (the battery is located in the engine compartment) and remove the p…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos