Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Replacing the Starter Motor

Model: Toyota Avensis MK 1, T220 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Starter motor

See other generations:
Video tutorial

Before proceeding with disassembly, place the vehicle on suitable axle stands and disconnect the battery. Locate the starter motor, which is situated on the gearbox, just below the intake manifold, near the oil filter.

Disconnect the plugs and power cables, then move on to the fixing bolts of the starter motor to the gearbox. At this point, you can remove the old starter motor and proceed in reverse for the installation of the new one: do not overlook the possibility of installing a refurbished starter motor.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

How to disassemble the starter motor of the Toyota Avensis D-4D
How to disassemble the starter motor of the Toyota Avensis D-4D
Toyota Avensis (1997-2003 / MK 1, T220) In this short guide, we will see the main instructions that will allow us to disassemble and replace the starter motor of the Toyota Avensis D-4D. Fi…
Check Starter Motor Functionality
Check Starter Motor Functionality
Toyota Avensis (2003-2008 / T250, MK 2) Once the starter motor is removed (disconnect the battery during removal), you can test its functionality on the bench using a booster or a battery: …
How to replace the starter motor of the Toyota Avensis 2.0 D-4D
How to replace the starter motor of the Toyota Avensis 2.0 D-4D
Toyota Avensis (2009-2018 / MK 3, T270) Today's main steps will illustrate the process of disassembly and replacement of the starter motor of the Toyota Avensis 2.0 D-4D. First, we open the…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos