Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the starter motor of the Toyota Avensis 2.0 D-4D

Model: Toyota Avensis T270, MK 3 - Years 2009-2018
Part: Starter motor

Today's main steps will illustrate the process of disassembly and replacement of the starter motor of the Toyota Avensis 2.0 D-4D. First, we open the hood of the car and begin to locate the starter motor located at the bottom; to access it, it will be necessary to disconnect the various pipes, also removing the support located above the coolant hose, as shown in the video. At this point, we unscrew the starter motor screws to remove it, disconnecting all the electrical wiring; replace it with the new one and reassemble everything!

Posted on 20 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the starter motor of the Toyota Avensis D-4D
How to disassemble the starter motor of the Toyota Avensis D-4D
Toyota Avensis (1997-2003 / MK 1, T220) In this short guide, we will see the main instructions that will allow us to disassemble and replace the starter motor of the Toyota Avensis D-4D. Fi…
Where is the Fuse Box on the Toyota Avensis 3?
Where is the Fuse Box on the Toyota Avensis 3?
Toyota Avensis (2009-2018 / T270, MK 3) In this guide for your Toyota Avensis Mk3 (2009-2018), follow these steps. First, ensure the car is off, then go outside and position yourself at the…
How to Remove the Battery on a Toyota Avensis
How to Remove the Battery on a Toyota Avensis
Toyota Avensis (2009-2018 / T270, MK 3) Replace the damaged battery of a Toyota Avensis. Open the front bonnet of the car (the battery is located in the engine compartment) and remove the p…

    Frequently Asked Questions

    • Avensis 2003-2008 - Where is the starter located on the Toyota Avensis? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos